Tel.01538 756800

Prices and Ordering

Visa Credit payments supported by WorldPayVisa Debit payments supported by WorldPay Mastercard credit payments supported by WorldPay Visa Electron payments supported by WorldPay Maestro payments supported by WorldPay JCB payments supported by WorldPay WorldPay Payments Processing

Payment methods

By telephone: We can accept phone (01538 756800) payments with a credit or debit card.

By paypal: We accept internet payments by PayPal to cah@heathcote-electronics.co.uk. If you wish send us an email of the items you require we can send you a paypal request.

By post: We accept payment by post this may be by cheque, postal order, credit or debit card. Send these to Heathcote Electronics, 1 Haydock Close, Cheadle, Staffs, ST10 1UE, UK.

Online Payments: To make these please use the table of our products below.

Postage: Postage within the UK is £4.00 per order. Within Europe postage is £9.50 per order and International postage is £15 per order. The goods will be sent First class or Airmail as appropriate.

Terms and conditions: These are at the foot of the page.

Motorised kits

Uncoupler Kit

£15.90

For OO gauge tension lock couplings

Motorised Private Siding Gate Kit

£27.50

For OO gauge

Train detection

IRDOT-1

£12.95

standard infra red detector train occupancy LED and output to connect to our other units such as SA1

IRDOT-1EW

£14.95

Extended wire version

IRDOT-1D

£13.45

approx 5second undetect delay

IRDOT-1DEW

£15.65

Extended wire version

IRDOT-1AD

£14.45

adjustable delay of 3 to 24 seconds in 3 second steps.

IRDOT-1ADEW

£16.45

Extended wire version

IRDOT-2

£14.55

LED indication and SPDT isolated contacts

IRDOT-2EW

£16.55

Extended wire version

IRDOT-2D

£15.05

approx 5second undetect delay

IRDOT-2DEW

£17.05

Extended wire version

IRDOT-3

£17.00

IRDOT-3EW

£19.20

Extended wire version

IRDOT-3D

£18.00

adjustable delay of 3 to 24 seconds in 3 second steps.

IRDOT-3DEW

£20.20

Extended wire version

DCC

DCC Accessory Decoder-1

£12.50

DCC uncoupler kit

£21.90

available soon

DCC Bouncing Semaphore Controller

£18.90

DCC powered and controlled Servo motor controller to give realistic bounce to semaphore signals.

Points

Automatic Route Selector (solenoid)

£20.50

Peco Hornby and Seep Point motors

CDU (Capacitor Discharge Unit)

£9.90

CDU Extra Power

£11.90

Point Indicator-Standard

£19.70

Built in resistors Supplied with 8 LEDs

Point Indicator-SO

£18.90

Point Indicator-Relay

£27.50

Built in resistors and contacts. Supplied with 8 LEDs.

IRDOT-P

18.50

IRDOT-PEW

20.70

Extended wire version

Level crossings

Single track crossing kit

£44.50

Complete kit apart from connection wire and power supply

Double track crossing kit

£85.50

Complete kit apart from connection wire and power supply

Gated crossing controller

£24.50

Controls 2 servos to operate gates and contact.

Circuit board only.

UK crossing 2L

£17.90

Controls 2 sets of lights (amber and 2 flashing red) and contact

Circuit board only.

UK crossing 4L

£22.90

Controls 4 sets of lights (amber and 2 flashing red) and contact.

Circuit board only.

UK Crossing 2LServo

£29.80

Controls 2 sets of lights (amber and 2 red) and 2 servos for raising barriers.

Circuit board only.

UK Crossing 4L Servo

£34.90

Controls 4 sets of lights (amber and 2 red) and 2 servos for raising barriers with contact

Circuit board only.

Grade Crossing 2L

£18.50

Controls 2 sets of lights (2 flashing red per set)

Circuit board only.

Grade Crossing 4L

£22.90

Controls 4 sets of lights (2 flashing red per set)

Circuit board only.

Grade Crossing 2L Servo

£29.50

2 sets of lights (2 flashing red per set) 2 servo controls

Circuit board only.

Grade Crossing 4L Servo

£34.90

4 sets of lights (2 flashing red per set) 2 servo controls and contact

Circuit board only.

Grade Crossing 2LFALLER

£18.80

For American and Continental crossings operates motor in Faller kit

Circuit board only.

Lighting effects

Arc Welder Effect

£16.50

Flickering Fire Effect

£16.50

Lighthouse Effect

£16.50

ModernFlashingBuffer Stop

£16.50

(4 yellow LEDs)

Flashing LED board

£16.50

(8 LEDs)

Arc Flasher

£16.50

simulates electric train electric flashes

Signalling

MAS Sequencer  (common negative)

£18.90

Please select number of aspects

MAS Sequencer EW  (common negative)

£21.10

Extended wire version

MAS Sequencer RI  (common negative)

£20.30

Also controls route indicator (feather)

MAS Sequencer RI EW  (common negative)

£21.50

Also controls route indicator (feather)

MAS Sequencer RI 2EW  (common negative)

£24.70

Also controls route indicator (feather)

Extended wire version

MAS Sequencer RI (Yellow)  (common negative)

£20.30

For 3 and 4 aspect signals. Also controls route indicator (feather). Signal displays yellow when feather lit.

MAS Sequencer RI (Yellow) EW  (common negative)

£22.50

For 3 and 4 aspect signals. Also controls route indicator (feather). Signal displays yellow when feather lit. Extended wires.

MAS Sequencer RI (Yellow) 2EW  (common negative)

£24.70

For 3 and 4 aspect signals. Also controls route indicator (feather). Signal displays yellow when feather lit. 2 sets of extended wires, one set for each route.

IRDASC-4   (common negative)

£18.70

For 2,3 or 4 aspect signals.

IRDASC-4-EW   (common negative)

£20.90

For 2,3 or 4 aspect signals. Extended wire version.

IRDASC-4RI   (common negative)

£19.90

For 2,3 or 4 aspect signals. All aspects light as appropriate when Route Indicator lit.Please select either 2,3 or 4 aspect

IRDASC-4RI (Yellow)   (common negative)

£19.90

For 3 or 4 aspect signals. Also controls route indicator (feather). Signal displays yellow when feather lit.

IRDASC-4RI-EW   (common negative)

£22.10

For 2,3 or 4 aspect signals. Also controls route indicator (feather). Signal displays appropriate aspect when feather lit.Extended wire version

IRDASC-4RI-EW (yellow)  (common negative)

£22.10

For 3 or 4 aspect signals. Also controls route indicator (feather). Signal displays yellow aspect when feather lit.Extended wire version

IRDASC-4RI-2EW   (common negative)

£24.90

For 2,3 or 4 aspect signals. Also controls route indicator (feather). Signal displays appropriate aspect when feather lit.Extended wire version. 2 pairs of Extended wires for both routes.

IRDASC-5   (common negative)

£19.90

For 2,3 or 4 aspect signals. Track isolation when signal is red.

IRDASC-5-EW  (common negative)

£22.10

For 2, 3 or 4 aspect signals. Track isolation when signal is red. Extended wire version

IRDASC-5RI   (common negative)

common negative

£21.50

For 2,3 or 4 aspect signals, Also controls route indicator (feather). Track isolation when signal is red.

IRDASC-5RI-EW  (common negative)

£23.70

For 2,3 or 4 aspect signals, Also controls route indicator (feather). Track isolation when signal is red. Extended wire version.

IRDASC-5RI-2EW  (common negative)

£25.90

Two sets of extended wires for detecting on both diverging routes.

Please select either 2,3 or 4 aspect

IRDASC-1   (common negative)

£17.40

IRDASC-1EW com neg

£19.60

Extended wire version

IRDASC-DSS

£18.50

IRDASC-DSS-EW

£20.70

For non servo Dapol semaphore signals. Extended wire version

IRDASC-3 com pos or com neg

£18.50

IRDASC-3-EW com pos or com neg

£20.70

Extended wire version

Semaphore-Sequencer

£18.90

For use with Dapol Semaphore signals

Semaphore-Sequencer-EW

£21.10

Extended wire version

Bouncing Semaphore Controller

£14.90

Servo motor controller to give realistic bounce to semaphore signals.

DCC Bouncing Semaphore Controller

£18.90

DCC powered and controlled Servo motor controller to give realistic bounce to semaphore signals.

Train Direction Detector

£17.50

For bidirectional signalling. DC only.

OO gauge Model Signals

Berko 4aspect signal 00 gauge

£18.50

Standard height B605

Berko 3aspect signal 00 gauge

£18.50

Standard height B504

Berko 3aspect signal 00 gauge

£18.50

Shorter height for platforms B531

Berko 2aspect signal 00 gauge

£16.50

Standard height B229

Berko 2aspect signal 00 gauge

£16.50

Shorter height for platforms B302

Eckon 3 aspect signal kit with left hand feather 00 gauge.

£20.00

Standard height ES8L

Eckon 3aspect signal kit with right hand feather 00 gauge.

£20.00

Standard height ES8R

Relay boards

Relay Board -4 double pole relays

£24.75

Latching Relay Board -4 double pole latching relays

£26.90

Servo Motor

Servo Motor Digital

£5.15

This is digital type of servo motor which does not suffer overshoot at power up.

Servo Motor bracket

£1.20

Single Servo Motor Controller

£10.65

Controls 1 Servo motor (without connector for extended push button).

Single Servo Motor Controller2

£11.15

Controls 1 Servo motor (with connector for single extended push button).

Dual Servo Motor Controller

£16.95

Controls 2 Servo motors (without extended push button connector.)

Dual Servo Motor Controller2

£17.95

Controls 2 Servo motors with connector for extended push button.

Bouncing Semaphore Controller

£14.90

Servo motor controller to give realistic bounce to semaphore signals.

Extension lead for Servo Motor

£1.60

300mm cable which clips between the servo motor cable and its control board

Piano/spring wire

1.00

1 length (approx 30cm) 0.5mm piano wire for linkages

Servo Motor Controller extended push buttons

£16.00

Plugs into single and Dual Servo Controller to allow remote set up.

Train Controls

Simple Shuttle

£19.90

needs IRDOT-1 or reed for other end of line.

Simple Shuttle-EW

£22.10

As above. Extended wire version

Simple Station Stop

£19.80

Simple Station Stop-EW

£22.00

Extended wire version

SA1

£33.90

Shuttle

SA1-S

£35.95

Shuttle with starter signal control

SA1-DSS

£35.95

Shuttle with starter signal control

SA1.1

£35.80

Shuttle with intermediate stops

SA1.1-S

£41.50

Shuttle with intermediate stops and signal control for 4 starter signals

SA2

£38.50

Shuttle siding at each end.(2 trains)

SA2-S

£40.65

As SA2 + 4 starter signal controls.

SA2-DSS

£40.65

As SA2 + 4 starter signal controls for Dapol Semaphores

SA3

£41.00

Shuttle with passing loop (2 trains)

SA4

£38.00

Passing loop for oval ( 2trains opposite directions)

SA4-S

£39.80

Passing loop for oval ( 2 trains opposite directions) and signal control

SA5

£37.00

Passing loop same direction trains

SA5-PB

£37.00

Passing loop with Push button start

SA5-S

£39.00

Passing Loop with control for 2 starter signals

SA5-SPB

£39.00

Push button start plus signal control

SA5-SB

£40.50

Passing Loop with Block section operation

SA6

£34.50

Operates storage sidings when combined with IRDOT-P

SA6-B

£35.50

Block section operation of storage sidings

SA7-SB

£31.90

Block section operation signal control

SA8

£31.90

Station stop

SA8-S

£32.95

Station stop with signal control

SA8-DSS

£32.95

Station stop for Dapol signal

SA8-SB

£31.90

Station stop with signal

block control

SA9

£38.50

Shuttle with siding for 2 trains

SA9-S

£42.85

Shuttle with siding for 2 trains controls 3 starter signals

SA9-DSS

£42.85

Shuttle with siding for 2 trains controls 3 Dapol starter signals

SA10

£38.50

Shuttle with siding for 1 train

Miscellaneous

Dual Timer

£19.50

Diamond Crossing Protector

£19.40

Fairground Ride Motor Controller

£30.65

Electrical components

Bridge Rectifier 2 amp rating

£1.50

For use with reverse loops and powering from DCC

Diode 1 Amp rating

10p

Diode 3 Amp rating

20p

Lamps LEDs and bulbs

Red LED 5mm diameter

25p

Yellow LED 5mm diameter

25p

Green LED 5mm diameter

25p

Blue LED 5mm diameter

75p

Red/green LED 5mm diameter, Bi-colour 2 legs

60p

powering from AC gives yellow

Red/green LED 5mm diameter, Bi-colour 3 legs

60p

both lit gives Yellow

Reddish-orange LED 5mm diameter, high brightness

50p

Red LED 3mm diameter

25p

Green LED 3mm diameter

25p

Yellow LED 3mm diameter

25p

Blue LED 3mm diameter

75p

Red / Green 3mm diameter Bi-colour LED 2 legs

60p

both lit gives Yellow

Red / Green 3mm diameter Bi-colour LED 3 legs

60p

both lit gives Yellow

WhiteLED 3mm diameter

80p

LED panel mounting clips

10p

for 5mm diameter LEDs

LED panel mounting clips

10p

for 3mm diameter LEDs

Gas Lamp model

£2.50

OO scale model gas lamp

blue minature LED

90p

tiny surface mount led attached to leads

red minature LED

90p

tiny surface mount led attached to leads

Relays

Relay 12volt coil 3amp rated contacts..

1.50

Single pole double throw.

Relay 12volt coil 10amp rated contacts.

£1.95

Single pole double throw.

Relay 12volt coil 3amp rated contacts.

£1.95

Double pole double throw.

Resistors

Resistors, 1/4 watt

4p

Various values, e.g. 470ohm, 1K, 1K8

Switches

Micro Switch

£1.35

Operated by point tiebar etc

Push Button Switch. Panel mounting, push to make

75p

Black, Red, blue, Yellow or White

Reed switch

1.45p

Reed switch N gauge

£1.65

Magnet

1.00p

Magnet N gauge

90p

powerful neodynium magnet

Toggle Switches

on/off toggle switch

£1.50

Single pole on/off

SPDT toggle switch

£1.65

Single pole double throw (changeover)

DPDT toggle switch

2.00

Double pole double throw (changeover)

SPDT CO toggle switch

1.80

Single pole double throw, centre off

DPDT CO toggle switch

2.00

Double pole double throw, centre off

4 pole double throw toggle switch (on-on)

£3.70

Usefull for interlocking Servo point motors with signalling and frog switching.

SPDT toggle switch (momentary/spring loaded)

1.80

For Solenoid Point Motors (e.g. Peco)

DPDT toggle switch (momentary/spring loaded)

£2.20

For Solenoid Point Motors or Kato

Wiring

Terminal Blocks

1.60p

12 Way 2 amp chocalate block

Wire, Flexible, 1.4 Amp, 10 metre length

£1.70

Please click on colour you wish to buy

Wire, Flexible, 3 amp, 10 metre length

£3.10

Please click on colour you wish to buy

Cable Ties, per pack of 30 Bases and 50 Ties.

£5.50

D-Type connectors

9 way plug D-type

55p

9 way D-type cover

60p

15 way plug D-type

65p

15 way D-type cover

70p

25 way plug D-type

70p

25 way D-type cover

75p

9 way socket D-type

55p

15 way socket D-type

65p

25 way socket D-type

70p

Heat shrink

2.4mm diameter, per 1.2m length

£1.35

Shrinks to half this diameter when heated

4.8mm diameter, per 1.2m length

£1.65

Shrinks to half this diameter when heated

Power supplies

Power Supply mains to regulated 12 volts D.C. 1 Amp.

£9.90

only suitable for UK

Power Supply mains to regulated 12 volts D.C. 2 Amp.

£16.00

only suitable for UK

For powering CDUs Power Supply mains to regulated 24 volts D.C.

£12.00

only suitable for UK

Terms and Conditions

Our terms and conditions comply with current legislation, including the Distance Selling Regulations and are designed to ensure that all of our customers can shop easily and with confidence at Heathcote Electronics.

Pricing: All prices are in £ (pound) sterling, and the table displays the full price exclusive of delivery charges. You may pay by any of the credit and debit cards shown on the page. We can also accept payment by cheque and postal order made out to Heathcote Electronics. We are under no obligation to accept your order. Prices, offers and products are subject to availability and may change at any time prior to acceptance of your order.

Accepting Orders and Security: When you place an order we will treat it as an offer to buy. When the funds are transferred we make a legal contract with you. However, we will be entitled to refuse to accept your order if we feel it necessary, in which case we will phone or e-mail you as soon as we can to let you know. We do not hold a data base of customer details and never sell or disclose customer information.

Cancellations and Returns: You may normally cancel your purchase if you notify us within 7 days of delivery. If there is a fault or some other defect with your product(s) you may return it to us within 28 days for a replacement or refund and within 1 year for a repair or replacement. This does not apply to faults caused by accident, neglect or misuse. We will send you returns instructions. Your product must be complete and in unused 'as new' condition (e.g., if you have opened the box to examine the product you must have done so without damaging or marking the product in any way). It should be returned with the original receipt and in the original box with packing and accessories. We will refund the money paid (not including p&p) by either a refund to the card or by a sterling cheque made out to the purchaser.

Delivery: For items already in stock we arrange despatch the next day and normally use first class post. If the delay will be more than 7 working days from the receipt of your order we will contact you with our estimated despatch date.