|
PRODUCT INDEX |
|||||
| The "New Products" page may contain products not yet listed below. | |||||
| Products marked S work with standard (analogue) control. | |||||
| Products marked D work with DCC control. | |||||
| SUBJECT | DESCRIPTION | LINK & CODE | |||
| Automatic Route Selector | Switches points in various sequences | S D | Auto. Route Selector | ||
| Block Section | General explanation of Block Sections. | S D | Information | ||
| Control of points of a loop plus slow/accelerate plus signalling | S -- | SA5-SB | |||
| Control of out of sight storage loops plus slow/accelerate. | S -- | SA6-B | |||
| Control of block section plus slow/accelerate plus signalling | S -- | SA7-SB | |||
| Station Stop block section plus slow/accelerate plus signalling | S -- | SA8-SB | |||
| Capacitor Discharge | Capacitor Discharge Unit | S D | CDU | ||
| DCC Coach Lighting | LED Lighting and decoder complete on one board. | -- D | DCC Coach Lighting | ||
| Dual Timer | Two separate adjustable timer circuits, each switches a single pole relay | S D | Dual Timer | ||
| Fairground Ride | Motor Controller for Fairground Rides. Gradual acceleration/deceleration. Ride time. Max. speed | S D | Fgd Motor Controller | ||
| Grade Crossing | American style level crossing controller | S D | Grade Crossing | ||
| Level Crossing | British style level crossing controller | S D | Level Crossing | ||
| Light Effects | Arc Welder Effect. A scenic effect to give the impression of arc welding lights | S D | Arc Welder | ||
| As above. With sound effect | S D | Arc Welder + Sound | |||
| Fire Effect. A scenic effect to give the impression of a fire. | S D | Fire Effect | |||
| Lighthouse Effect. Gives the effect of a beam of light sweeping round. | S D | Lighthouse Effect | |||
| Passing Loop | For an oval. Opposite direction trains. | S -- | SA4 | ||
| For an oval. Opposite direction trains. With two starter signals. | S -- | SA4-S | |||
| For an oval. Same direction trains (two trains). | S -- | SA5 | |||
| For an oval. Same direction trains (two trains). Starter signals at end of each loop. | S -- | SA5-S | |||
| For an oval. Same direction trains (two trains). Signal and block section control. | S -- | SA5-SB | |||
| Point Indicator | Lights LEDs to show settings of solenoid activated points. With memory. | S D | Point Indicator | ||
| As above but with more powerful output to switch relays etc. | S D | Point Indicator SO | |||
| Point Motors | Solenoid Point Motors, Kato Unitrak points, switches, wiring and information. | S D | Information | ||
| Relay Boards | With two or four double pole relays. Powered by 12 to 16 volts AC or DC. | S D | Relay Board | ||
| With two or four double pole latching relays. Powered by 12 to 16 volts AC or DC. | S D | Latching Relay Board | |||
| Reverse Loop | Information on requirements for automatic operation | S -- | Information | ||
| Route Indicator | Route indicator facility is on both IRDASC-4RI and IRDASC-5RI boards. | S D | IRDASC-4RI | ||
| SA Boards | Boards with adjustable gradual braking and acceleration facilities. | S -- | SA Boards | ||
| SA Board Shuttles | Shuttle. | S -- | SA1 | ||
| Shuttle plus intermediate stops. | S -- | SA1.1 | |||
| Shuttle with signal control at each end. | S -- | SA1-S | |||
| Shuttle with siding at one end (for two trains). | S -- | SA9 | |||
| As above with control for two signals at the siding end. | S -- | SA9-S | |||
| Shuttle with reverse loop at one end. | S -- | SA12 | |||
| Shuttle with reverse loop and control for one starter signal. | S -- | SA12-S | |||
| Shuttle with siding at each end (for two trains). | S -- | SA2 | |||
| As above with two starter signals at one end | S -- | SA2-S | |||
| Shuttle with passing loop for two trains. | S -- | SA3 | |||
| Simple Shuttle | Simple Shuttle. For slow trains where no acceleration or braking required. | S -- | Simple Shuttle | ||
| Signals | General explanation of 2, 3 and 4 aspect signalling. | S D | Information | ||
| General review of products for 2 Aspect signals. | S D | Information | |||
| "IRDASC". Infrared Detection And Signal Controllers. How they operate | S D | Information | |||
| 2 Aspect signals wired common to negative. | S D | IRDASC-1 | |||
| 2 Aspect signals wired via a relay for bulb and LED signals | S D | IRDASC-2 | |||
| 2Aspect signals, as above + relay to prevent train passing a red signal | S D | IRDASC-3 | |||
| 2, 3 and 4 aspect LED signal control | S D | IRDASC-4 | |||
| 2, 3 and 4 aspect LED signal control plus isolation section for signal at red. | S D | IRDASC-5 | |||
| MAS Automatic control for one signal. Operates 2, 3 or 4 Aspect Signals | S D | MAS-Sequencer-4 | |||
| Station Stop | Train gradually decelerates, stops, then gradually accelerates. | S -- | SA8 | ||
| Train gradually decelerates, stops then gradually accelerates. Plus signal control. | S -- | SA8-S | |||
| Gradual deceleration, stop, gradual acceleration plus signal plus block section. | S -- | SA8-SB | |||
| Storage sidings | General description of automatic operation | S -- | Information | ||
| Automatically operates storage sidings. | S -- | SA6 | |||
| Automatically operates storage sidings. Plus block section control. | S -- | SA6-B | |||
| Train detection | IRDOT-Infrared Detection Of Trains A summary. | S D | Information | ||
| Detect train and light a (control panel) LED | S D | IRDOT-1 | |||
| Detect train and light a (control panel) LED. With 5 second undetected delay. | S D | IRDOT-1D | |||
| Detect train and light a (control panel) LED, plus built-in changeover relay. | S D | IRDOT-2 | |||
| As above with 5 second undetected delay. | S D | IRDOT-2D | |||
| Detects, operates detect + undetect LED's or bicolour LED. Built-in Double pole relay | S D | IRDOT-3 | |||
| As above with selectable undetected delays. | S D | IRDOT-3D | |||
| Detect train and activate solenoid point motor. | S D | IRDOT-P | |||
| Train Direction Detector | Senses which direction a train is moving. Activates the RR terminals of signal units | S -- | Train Direction Detector | ||