The ARC WELDER EFFECT board has a bright blue LED which lights randomly to give welding effects. By changing the terminals connected to the blue LED a high frequency random flicker can be superimposed upon the blue LED. By adjusting a pot the speed of the random flashing can be changed. A red LED is provided which gives the effect of hot glowing metal which increases in brightness as welding begins and decreases when welding stops.
Voltage 12 to 16 volts, AC or DC
SIZE Length x Width 3.55 x 2 Inches 90 x 50 Millimetres
The Fire Effect has 3 orange high intensity LEDs which flicker randomly to give the effect of a fire. The Flickering fire effect can be put inside a building or a bonfire can be built around the LEDs.
Voltage 9 to 16 volts, AC or DC
SIZE Length x Width 3.1 x 1.9 Inches 79 x 49 Millimetres
The LIGHTHOUSE EFFECT BOARD flashes a white LED at 4 second intervals. The light increases and decreases in intensity gradually to give the effect of a beam of light sweeping round rather than a light simply switching on and off. PowerThe board is powered from a supply of between 9 and 16 volts either AC or DC. This connects to the two screw terminals as shown in the diagram. For DC the positive is connected to the "+" and the negative to the "-" terminals. The board is supplied with a white LED fitted in the screw terminals. The short leg of the LED goes to terminal "1" , the long leg to terminal "2". If desired the unit can be used to power different LED's provided they do not have built in resistors.